Is your morning routine more chaotic than calm? A frantic search for the toothpaste, a countertop covered in bottles, and drawers that refuse to close. It’s a familiar story for many. A cluttered bathroom, no matter its size, can make the start of your day feel stressful.
But your bathroom should be a peaceful retreat. It should be a place where you can prepare for the day ahead or unwind at the end of it. Getting there is simpler than you think. It starts with clearing the clutter and giving everything a proper home.
This guide is here to help you reclaim your space. We have gathered 42 smart and practical storage solutions for a tidy bathroom. From quick five-minute fixes to satisfying weekend projects, you will find an idea that works for your home and your budget. Let’s get started.
1. Rolling Bathroom Cart
A rolling cart brings fantastic flexibility to bathroom organization. Its slender design allows it to fit into tight spaces, like the gap between the toilet and the vanity or an unused corner. You can easily move it around for cleaning or to bring your essentials closer to the tub or shower.
This simple piece of furniture uses vertical space to your advantage. The multiple tiers provide separate areas for different categories of items. Dedicate a shelf for your morning routine, another for evening products, and a basket for dental care. This keeps everything visible and within reach, ending the frantic search for what you need.
DIY: Assembling Your Cart
Putting together a rolling cart is a great beginner project. Think of it like building with big LEGOs!
What You’ll Need:
- All the parts from the cart’s box (shelves, poles, wheels, screws)
- The small tool that usually comes with it (like an Allen key or a small wrench)
- A clear space on the floor
Instructions:
Step 1: Unpack and Count! First, open the box and carefully lay out all the pieces. Look at the instruction paper that came in the box and make sure you have all the parts shown. It’s like a treasure map for your cart!
Step 2: Give Your Cart Feet (or Wheels!) Take the bottom shelf or basket. Find the four holes in the corners underneath. Gently push a wheel into each hole until it clicks or feels snug. Now your cart can roll!
Step 3: Start Building Up Now, take two of the long metal poles. Find the holes on top of the bottom shelf you just put wheels on. Screw these poles into place. Make them stand up straight and tall.
Step 4: Add Another Level Grab the next shelf. Carefully slide it down over the tops of the poles you just attached. It should rest securely. If there are little screws to tighten on the side, use your tool to make them snug, but not too tight.
Step 5: Reach for the Top! Repeat Step 3 and Step 4. Add the next set of poles, then the next shelf. Keep going until your cart is fully built.
Step 6: The Final Touches Attach the handle at the top if your cart has one. You can now clip on any extra hooks or cups that came with it. These are great for holding brushes or sponges. Your cart is built! Now you can organize all your bathroom items on its shelves.
2. Illuminated Medicine Cabinet
This is more than just a mirror. An illuminated medicine cabinet combines storage, lighting, and even power outlets into one sleek unit. It keeps all your daily toiletries hidden away, reducing visual clutter over your sink.
The built-in light provides excellent, even lighting for grooming tasks. Inside, you’ll find adjustable shelves to fit bottles of all sizes. Some models even have plugs for charging an electric toothbrush or shaver, keeping wires off the counter. It’s a true multipurpose organizer.
DIY: Installing Your Cabinet
Hanging a medicine cabinet is a job for a grown-up, but you can be their super helper!
What You’ll Need:
- The new cabinet
- A pencil
- A level (it looks like a ruler with a bubble in it)
- A stud finder (a tool that beeps to find strong spots in the wall)
- A drill and screws
Instructions:
Step 1: Find a Strong Spot First, an adult will use the stud finder to locate the strong wooden beams inside the wall. They will mark these spots with a pencil. You need a strong spot so the heavy cabinet doesn’t fall.
Step 2: Mark the Spot Hold the cabinet against the wall where it will go. The adult will use the level to make sure it’s perfectly straight, not crooked. Then, they will use a pencil to mark the location of the mounting holes on the inside of the cabinet.
Step 3: Drill the Pilot Holes The adult will drill small holes where the pencil marks are. These are called pilot holes and they help the big screws go in easier.
Step 4: Hang the Cabinet Now for the exciting part! The adult will lift the cabinet into place, lining up the holes in the cabinet with the new holes in the wall.
Step 5: Secure It! While one person holds it steady, another will use the drill to put the screws through the cabinet and into the wall. Make them tight and secure. That cabinet isn’t going anywhere!
Step 6: Power Up (Safely!) If your cabinet has lights or plugs, a qualified electrician must handle the wiring. Never play with electricity. Once it’s all connected, you can fill your new cabinet!
3. Decorative Ladder Shelf
A leaning ladder adds instant style and storage without taking up much floor space. It’s a relaxed and modern way to hold towels, and you can add hooks and baskets for even more organization.
This type of storage is great because you don’t have to drill any holes in the wall. You can simply lean it and move it whenever you like. Use the rungs to drape fresh towels or hang baskets filled with toilet paper, soaps, or lotions.
DIY: Building a Simple Ladder Shelf
You can build your own rustic ladder with a little help from an adult.
What You’ll Need:
- Two long, flat wooden boards for the sides (about 5-6 feet long)
- Three or four thick wooden dowels for the steps (about 1-1.5 feet long)
- A drill
- Wood glue
- Screws
- Sandpaper
Instructions:
Step 1: Smooth Everything Out First, take the sandpaper and rub it on all the wood pieces. This makes them smooth so no one gets splinters.
Step 2: Mark Your Holes Lay the two long boards on the floor, side by side. Use a ruler to measure and mark spots for your steps (the dowels). Make sure the marks are in the same place on both boards so your steps aren’t crooked.
Step 3: Drill the Holes An adult should use a drill to make shallow holes where you made your marks. The holes should be about the same size as the end of your dowels, but not go all the way through the wood.
Step 4: Glue the Steps Put a drop of wood glue into each hole on one of the long boards. Then, push one end of each dowel into a hole. It’s starting to look like a ladder!
Step 5: Put It All Together Put glue in the holes of the second long board. Carefully line it up and press it onto the other ends of the dowels. You might need someone to help you hold it all together.
Step 6: Make it Strong For extra strength, an adult can drill screws through the outside of the long boards into the ends of each dowel. Once the glue is dry, your ladder is ready to lean against the wall and hold your things!
4. Recessed Shower Niche
A shower niche is a storage space built right into the wall of your shower. It’s a clean and custom way to keep your shampoo, conditioner, and soap organized without using bulky caddies.
These built-in shelves keep everything off the floor or the edge of the tub. This makes your shower feel bigger and less cluttered. You can have a niche built in any size, with multiple shelves, and you can use cool tiles on the back to make it a design feature.
DIY: Understanding How a Niche is Built
Making a real shower niche is a big job for professionals, but you can learn how it’s done! It’s like building a secret cubby in the wall.
What You’ll Need (for a professional):
- Measuring tape and pencil
- A saw to cut the wall
- Wood for the frame
- Waterproof board
- Special waterproof paint or liner
- Tile and tile glue (called thin-set)
- Grout (the stuff that goes between tiles)
The Steps (Simplified!):
Step 1: Find the Right Spot A builder first checks the wall to make sure there are no pipes or wires where you want the niche. They find the space between the wall’s wooden “studs.”
Step 2: Make an Opening Next, they carefully cut a rectangle out of the shower wall. It looks like a window into the wall.
Step 3: Build a Box Inside the hole, the builder makes a wooden frame to create the back and sides of the niche. This box is what will hold your bottles.
Step 4: Make It Waterproof! This is the most important part! They cover the entire inside of the box with a special waterproof board and seal all the seams. They might even paint it with a rubbery paint to make sure no water can ever leak into your walls.
Step 5: Add the Tile Now for the fun part. They spread tile glue inside the niche and press pretty tiles onto the back and sides.
Step 6: Finish with Grout After the glue is dry, they smear grout in all the cracks between the tiles and wipe off the extra. The grout seals everything and makes it look finished. Now you have a waterproof, built-in shelf!
5. Over-the-Door Organizer
Use the forgotten space on the back of your bathroom door. An over-the-door organizer gives you a huge amount of storage without needing any tools or making any holes.
These organizers come with a mix of wire baskets and fabric pockets. This variety is great for holding items of all shapes and sizes. Taller baskets can hold bottles and hair dryers, while smaller pockets can keep makeup and brushes tidy. It puts everything at eye level and within easy reach.
DIY: Make a Simple Fabric Door Organizer
You can make your own simple pocket organizer with some fabric and a clothes hanger!
What You’ll Need:
- A large piece of strong fabric (like canvas or felt)
- A wooden or plastic clothes hanger
- Smaller pieces of fabric for pockets
- Fabric glue or a sewing kit
- Scissors
Instructions:
Step 1: Cut the Main Piece Cut your large piece of fabric into a big rectangle. The width should be about the same as your hanger. The length can be as long as you want your organizer to be.
Step 2: Make it Hang Fold the top edge of the large rectangle over the bottom bar of the clothes hanger. Use fabric glue or have an adult help you sew it down to create a loop. Now you can hang it up!
Step 3: Create Your Pockets Cut your smaller fabric pieces into squares or rectangles. These will be your pockets. You can make them different sizes for different things.
Step 4: Attach the Pockets Take one pocket piece. Put fabric glue on the back of the two sides and the bottom edge. Leave the top open! Press the pocket firmly onto the main fabric piece where you want it to go.
Step 5: Add More Pockets Continue gluing on pockets in rows. You can make a row of small pockets at the top and bigger pockets at the bottom.
Step 6: Let it Dry and Hang! Let all the glue dry completely. Once it’s dry, your homemade organizer is ready! Hang it on the back of your bathroom door and fill the pockets with your lightweight supplies.
6. Under-Sink Curtain with Pockets
If you have a wall-mounted or pedestal sink, the space underneath can look messy with exposed pipes. A simple sink skirt is a charming way to hide the clutter and add a touch of softness.
This solution is especially clever because it includes pockets on the inside. You can store cleaning supplies, sponges, and extra brushes right where you need them, but they stay completely out of sight. It’s a simple project that makes a big impact on a small bathroom.
DIY: Crafting a Sink Skirt
This is a fun project if you have a grown-up to help with the sewing machine.
What You’ll Need:
- Fabric (enough to cover the front and sides of your sink)
- A tension rod (the kind that twists to fit in a space)
- Scissors and measuring tape
- A sewing machine or needle and thread
- Extra fabric for pockets
Instructions:
Step 1: Measure Your Sink First, use the measuring tape to see how wide your sink is and how tall it is from the counter to the floor. Add a few extra inches to your measurements so the fabric can be wavy.
Step 2: Cut the Fabric An adult can help you cut the fabric to the size you measured.
Step 3: Make the Pockets Cut out some squares from your extra fabric for the pockets. An adult should hem the top edge of each pocket (that means folding it over and sewing it so it looks neat).
Step 4: Sew on the Pockets Place the pockets on what will be the inside of your curtain. Have an adult sew them on along the sides and bottom, leaving the top open for you to put things in.
Step 5: Create the Rod Channel At the top of your large fabric piece, fold the edge over about two inches and sew it down. Make sure to leave the ends open. This creates a little tunnel, or channel, for the tension rod to slide through.
Step 6: Hem the Bottom To make it look finished, an adult should also hem the bottom edge of the curtain so it doesn’t touch the floor.
Step 7: Hang Your Curtain! Slide the tension rod through the channel you made. Then, squish the rod, place it under your sink, and let it expand until it’s snug. Arrange the fabric, and you’re done!
7. Magnetic Cabinet Organizer
Turn the inside of your medicine cabinet door into a smart storage spot. A magnetic panel allows you to store small metal items neatly, where they are easy to see and grab.
This system is great for things that usually get lost in a drawer, like tweezers, nail clippers, scissors, and bobby pins. You can add small magnetic cups to hold cotton swabs, hair ties, or makeup brushes. It uses a space that is almost always empty.
DIY: Create Your Own Magnetic Board
You can easily add a magnetic surface to any cabinet door.
What You’ll Need:
- A thin sheet of metal or a self-adhesive magnetic board
- Strong double-sided tape or construction adhesive
- Small magnets
- Small plastic or metal containers
Instructions:
Step 1: Measure Your Door Open your cabinet and measure the flat space on the inside of the door. This tells you how big your metal sheet needs to be.
Step 2: Get Your Metal Sheet Ready If you are using a plain metal sheet, an adult might need to cut it to the right size with special scissors called tin snips. Make sure they smooth any sharp edges with a file. If you’re using a self-adhesive board, you can just cut it with regular scissors.
Step 3: Attach the Board If your board is self-adhesive, just peel off the back and press it firmly onto the inside of the door. If it’s a metal sheet, an adult should put strong double-sided tape or glue on the back and press it into place.
Step 4: Let It Set Let the glue or adhesive dry completely so your board is stuck on tight.
Step 5: Magnetize Your Things! You can stick metal items like clippers right onto the board. For things that aren’t metal (like cotton swabs), put them in a small container. Then, glue a small, strong magnet to the back of the container.
Step 6: Organize! Once the magnet glue is dry, you can stick your new magnetic cups and other tools to your board. Everything is organized and easy to find!
8. Above-the-Toilet Floating Shelves
The wall space above your toilet is a prime spot for storage. Adding a few floating shelves is a simple way to gain more room for toiletries, towels, or even a few decorative items.
These shelves have a clean, modern look because you can’t see the brackets holding them up. They seem to “float” on the wall. Open shelving encourages you to keep things tidy, and it makes a small bathroom feel more open than a bulky, closed cabinet would.
DIY: Hanging Floating Shelves
Putting up shelves is another job where you can be the perfect assistant to a grown-up.
What You’ll Need:
- Floating shelf kit (which includes the shelf and a hidden bracket)
- A pencil
- A level
- A stud finder
- A drill
- Wall anchors (if you can’t drill into a stud)
Instructions:
Step 1: Pick Your Spot Decide where you want the shelves to go. Hold the shelf up to the wall to see how it looks.
Step 2: Find the Wall Studs An adult will use the stud finder to find the strong wood beams in the wall. It’s always best to attach shelves to these studs. They’ll mark the stud locations with a pencil.
Step 3: Mark for the Bracket Hold the metal mounting bracket on the wall. Use the level to make sure it’s perfectly straight. A crooked shelf won’t hold things very well! The adult will mark the screw holes with a pencil.
Step 4: Drill the Holes The adult will drill holes on the pencil marks. If a hole isn’t on a stud, they’ll push a little plastic thing called a wall anchor into the hole. This helps the screw grip the wall tightly.
Step 5: Attach the Bracket Now, line the bracket up with the holes and use the drill to screw it tightly to the wall. Give it a little wiggle to make sure it’s secure.
Step 6: Slide on the Shelf! This is the magic part. The floating shelf is hollow on one side. Just slide the shelf onto the bracket until it’s snug against the wall. Some shelves have tiny screws on the bottom to lock them in place. That’s it!
9. Customizable Drawer Dividers
Bathroom drawers can quickly become a jumbled mess. A set of drawer dividers is the secret to taming the chaos and giving every single item its own home.
Using individual, small containers as dividers is a great strategy. You can mix and match different sizes to create a layout that fits your stuff exactly. Clear plastic or bamboo trays look neat and make it easy to see everything at a glance. No more digging for your favorite lip balm!
DIY: Make Your Own Cardboard Dividers
You can create custom dividers for your drawers using nothing but cardboard!
What You’ll Need:
- A sturdy cardboard box
- A ruler
- A pencil
- Scissors or a craft knife (for adult use)
- A hot glue gun (for adult use)
Instructions:
Step 1: Measure Your Drawer First, measure the inside of your drawer. You need to know the width, length, and height.
Step 2: Cut Your Strips Based on your measurements, cut long strips of cardboard. The height of the strips should be a little less than the height of your drawer so it can close. An adult should do the cutting.
Step 3: Plan Your Layout Think about how you want to divide your drawer. Do you want long sections for brushes and smaller squares for little pots? Arrange your strips inside the drawer to see how they fit.
Step 4: Cut the Notches Take the cardboard strips that will cross each other. On one strip, cut a small slit from the top down to the middle. On the strip it will connect with, cut a slit from the bottom up to the middle.
Step 5: Interlock the Pieces Slide the two strips together where you cut the slits. They should fit together to make a “+” shape. This is how you build your grid without glue.
Step 6: Glue for Strength (Optional) For a stronger organizer, you can skip the slits. Just cut your cardboard pieces to the right lengths and have an adult use a hot glue gun to glue them together into a grid.
Step 7: Organize! Let any glue dry, then place your new custom divider in the drawer. Have fun sorting all your things into their new, neat compartments!
10. Wall-Mounted Towel Warmer
Bring a little bit of spa luxury into your home with a towel warmer. This is a rack that gently heats up, giving you a toasty warm towel when you step out of the shower.
Besides being cozy, a towel warmer is also very practical. The heat helps towels dry much faster, which prevents them from getting that damp, musty smell. It also doubles as storage, keeping your towels neatly hung on the wall and off the floor.
DIY: Mounting Your Towel Warmer
This is a big installation job for an adult, especially if it connects to electricity. You can help them with the measuring and tool-gathering.
What You’ll Need:
- The towel warmer kit
- A level
- A pencil
- A drill
- A stud finder
Instructions:
Step 1: Choose the Location With an adult, decide on the best place for the towel warmer. It needs to be near the shower but a safe distance from water. The adult will also make sure it can reach a power outlet if it’s a plug-in model.
Step 2: Mark the Mounting Points The adult will hold the warmer or its mounting posts against the wall. Using a level, they’ll make sure it’s straight, then mark the spots for the screws with a pencil.
Step 3: Drill for the Mounts The adult will drill holes on the pencil marks. Just like with the shelves, they will use wall anchors in any holes that aren’t on a strong wall stud.
Step 4: Attach the Mounts Next, they will screw the mounting posts securely to the wall. These are what the towel warmer will attach to.
Step 5: Connect the Warmer The adult will now attach the main towel warmer unit to the mounting posts. They will follow the instructions in the box to make sure it’s locked in place and very secure.
Step 6: Plug It In! If it’s a plug-in model, you can now plug it into the wall outlet. If it needs to be wired directly into the wall (hardwired), that is a job ONLY for a licensed electrician. Safety first! Now, hang up a towel and get ready for a warm hug after your next bath.
11. Deep Drawer Dividers
Don’t let your deep vanity drawers become a bottomless pit. Using sturdy dividers creates specific zones for larger items, making everything easy to find and put away.
This approach is wonderful for organizing things that don’t fit in a medicine cabinet, like a bathroom scale, cleaning supplies, or extra hand towels. By creating compartments, you prevent items from sliding around and becoming a jumbled mess. Everything has a designated spot.
DIY: Creating Sturdy Drawer Dividers
You can make your own heavy-duty dividers with some thin craft wood.
What You’ll Need:
- Thin plywood or hardboard
- A measuring tape
- A pencil
- A saw (for adult use)
- Wood glue or L-brackets
Instructions:
Step 1: Measure and Plan First, measure the inside of your deep drawer (width, length, and height). Plan out how many compartments you want. You might want a large section for a scale and smaller ones for towels.
Step 2: Cut Your Pieces An adult will need to carefully cut the thin wood to the sizes you planned. The height of the dividers should be just shorter than the drawer’s height.
Step 3: Assemble Your Grid There are two ways to put your dividers together. You can make interlocking slots like the cardboard dividers, or you can simply stand them up and glue the corners together with strong wood glue.
Step 4: Secure the Dividers For a very strong organizer, an adult can use tiny metal L-brackets to screw the corners of your dividers together.
Step 5: Place in Drawer Once the glue is dry or the brackets are in, carefully place your new divider frame into the drawer. It should fit snugly. Now you can organize all your big bathroom items.
12. Tiered Countertop Tray
A tiered tray is an elegant way to organize your most-used items on the bathroom counter. It uses vertical space, allowing you to store more without creating a wide, cluttered footprint.
This is a beautiful spot to display perfumes, skincare, and daily makeup. The different levels help you separate items and see everything at once. A spinning version, often called a Lazy Susan, makes it even easier to grab what you need with a simple turn.
DIY: Make a Tray with Plates and Candlesticks
You can make a stylish tiered tray using things you might find at a thrift store!
What You’ll Need:
- Two or three plates in different sizes (large, medium, small)
- Two glass or ceramic candlesticks
- Strong, waterproof glue (like E6000)
Instructions:
Step 1: Clean Everything Make sure your plates and candlesticks are very clean and dry. The glue will stick better this way.
Step 2: Build the First Level Take your largest plate and place it on a flat surface. Find the exact center. Put a circle of strong glue on the bottom of one of your candlesticks and press it firmly onto the center of the plate.
Step 3: Let it Dry You need to let this first part dry completely. This is important so your tower is strong. Check the instructions on the glue to see how long it takes.
Step 4: Add the Next Level Once the first candlestick is securely glued to the bottom plate, put glue on the top of that candlestick. Carefully place your medium-sized plate on top, making sure it’s centered.
Step 5: Add the Top Tier Repeat the process! Let the medium plate dry, then glue the second candlestick to its center. Let that dry, and then glue the smallest plate on top.
Step 6: Final Drying Time Let the entire tray sit for at least a full day to make sure all the glue is rock solid. After that, your beautiful, homemade tray is ready for your counter!
13. Hanging Wall Baskets
Go vertical with your storage by using hanging baskets. This rustic and charming solution adds texture to your bathroom walls while keeping essentials like towels and toilet paper off the floor.
This is a great option for bathrooms that don’t have much floor space for extra furniture. A set of tiered baskets hanging from a simple hook or a piece of driftwood can hold a surprising amount of stuff. It doubles as both a storage unit and a piece of wall art.
DIY: Create Your Own Hanging Basket System
Making this is like a fun arts and crafts project!
What You’ll Need:
- Three or four baskets of the same size
- A strong piece of rope
- A decorative branch, driftwood, or a wooden dowel
- Scissors
Instructions:
Step 1: Prepare Your Hanger Take your piece of wood or driftwood. Tie a long piece of rope to each end. Then, tie the two ends of the rope together at the top to make a triangle shape for hanging.
Step 2: Attach the First Basket Cut a long piece of rope. Tie one end securely to the left side of your top basket. Loop the rope over your driftwood hanger, then tie the other end to the right side of the same basket. Make sure it hangs evenly.
Step 3: Connect the Next Basket Cut another long piece of rope. Tie one end to the left side of your second basket. Now, loop this rope underneath the bottom of the top basket and back up, then tie the other end to the right side of the second basket.
Step 4: Adjust the Spacing Pull the rope to adjust how much space you want between the first and second basket. It should look like the second basket is hanging from the first one.
Step 5: Keep Going! Repeat the process to attach the third and fourth baskets, with each one hanging from the one above it.
Step 6: Secure and Hang Once all your baskets are attached and spaced out how you like them, you might want to add a dab of hot glue (with adult help) where the ropes touch the baskets to stop them from slipping. Now, hang your creation on a strong hook on the wall!
14. Cabinet Door Hair Tool Organizer
Tame the tangle of hair dryers, curling irons, and straighteners with an organizer that hangs on the inside of your cabinet door. This keeps hot tools safely stowed and cords managed.
This is a clever way to use hidden space. The organizer has specially sized cups and holders for each tool, and often includes hooks for wrapping the cords. This prevents heat damage to your shelves and keeps your countertops clear and wire-free.
DIY: PVC Pipe Hair Tool Holder
You can make a simple, heat-safe holder for your hair tools using plumbing supplies!
What You’ll Need:
- A piece of PVC pipe that is wider than your hair tools (an adult can help you choose)
- A saw (for adult use)
- Sandpaper
- Strong, removable adhesive hooks or screws
- A small wooden board
Instructions:
Step 1: Cut Your Pipes An adult needs to carefully measure and cut the PVC pipe into sections that are about 4-6 inches long. You will need one piece for each hair tool.
Step 2: Smooth the Edges The cut edges of the pipe might be sharp or rough. Use a piece of sandpaper to smooth them down so they don’t scratch you or your tools.
Step 3: Attach Holders to the Board Arrange the pipe pieces on your wooden board. You can stand them up straight or attach them on their sides. An adult can use strong glue or small screws from the back of the board to attach the pipes securely.
Step 4: Mount the Board Now, you can attach your finished organizer to the inside of your cabinet door. The easiest way is to use strong, removable adhesive hooks that can hold the weight.
Step 5: Time to Organize Let your tools cool down completely before you put them away. Slide your hair dryer, straightener, and curling iron into their new PVC pipe homes.
15. All-in-One Toilet Paper Stand
A freestanding toilet paper stand is a simple solution that requires no installation. It combines multiple functions in one compact unit, making it a smart addition next to any toilet.
These stands not only dispense the current roll but also provide storage for several backup rolls, so you never run out. Many models also include a small, flat shelf on top. This is a handy spot to place your phone, a book, or a container of wet wipes.
DIY: Assembling Your Stand
These stands almost always come in a box and need to be put together. It’s usually a very quick job!
What You’ll Need:
- All the parts from the box (base, poles, holder, screws)
- The small tool or Allen key included
Instructions:
Step 1: Check Your Parts Lay out all the pieces from the box. Use the instruction sheet to make sure nothing is missing.
Step 2: Build the Base Find the heavy bottom piece, which is the base. There will usually be a long pole that screws into the center of it. Twist it on by hand until it’s tight.
Step 3: Add the Storage Section If there is a canister or a set of vertical bars for holding extra rolls, slide that piece down over the pole you just attached. It should rest on the base.
Step 4: Attach the Top Now, screw the top part of the frame onto the main pole. This is usually the part with the arm that will hold the toilet paper roll you’re using.
Step 5: Add the Dispenser Arm The final piece is usually the small bar that holds the toilet paper. Slide it through your toilet paper roll and then attach it to the holder. Sometimes it clicks in, and sometimes it has a little screw to tighten.
Step 6: Stock It Up! Your stand is built! Put a few extra rolls in the storage area and you are all set.
16. Sliding Under-Sink Shelves
The cabinet under the sink is often a deep, dark space where bottles and supplies get lost in the back. Installing a set of sliding shelves completely solves this problem.
These organizers work like a drawer. The two-tiered system allows you to store many items, and the entire unit pulls forward smoothly. This lets you see and reach everything you own, even the items in the very back, without having to kneel down and empty the whole cabinet.
DIY: Installing a Sliding Organizer
This is a great project to help an adult with. It makes a huge difference in your cabinet!
What You’ll Need:
- A sliding shelf kit
- A measuring tape
- A pencil
- A drill
Instructions:
Step 1: Measure Your Cabinet First, you need to measure the inside of your cabinet to make sure you buy a sliding organizer that will fit. You need to know the width, depth, and height, paying attention to any pipes in the way.
Step 2: Assemble the Frame Most kits require you to first build the little shelf unit. Follow the instructions to attach the baskets to the sliding frame. It usually justinvolves a few screws.
Step 3: Position the Base Place the entire unit inside your cabinet. Push it all the way to the back. Make sure the cabinet door can still close.
Step 4: Mark the Holes The bottom of the organizer has a frame with screw holes. Use a pencil to mark where these holes are on the floor of your cabinet. Then, take the organizer out.
Step 5: Drill Pilot Holes An adult should drill small pilot holes where you made your pencil marks. This makes it much easier to get the screws in straight.
Step 6: Secure the Unit Place the organizer back in the cabinet, lining up the frame with your new holes. An adult will use a drill to put the screws in and secure the whole unit to the cabinet floor. Now, fill it up and give it a test slide!
17. Suspended Window Shelves
If your bathroom has a window, you can add storage without blocking the natural light. A suspended glass or acrylic shelf is a beautiful and airy way to hold plants or decorative items.
These shelves hang from thin cables or wires attached to the top of the window frame. They seem to float in the air, creating a minimal and modern look. This is a fantastic place for moisture-loving plants like orchids or ferns, which will thrive in the bathroom humidity and sunlight.
DIY: Hanging a Window Shelf
This project requires careful measuring and a steady hand from an adult.
What You’ll Need:
- A piece of glass or clear acrylic cut to fit your window
- A cable shelf hanging kit (includes wire, clips, and mounting hardware)
- A drill
- A level
- A measuring tape
Instructions:
Step 1: Prepare the Shelf If your shelf is glass, make sure the edges are smooth and polished so they aren’t sharp.
Step 2: Mark the Top Mounts An adult will need to install the mounting hardware into the top of the window frame. They will measure to make sure the two mounting points are evenly spaced.
Step 3: Attach the Cables Following the kit’s instructions, they will attach the hanging wires or cables to these top mounts. The cables will now hang down in front of the window.
Step 4: Attach the Shelf Clips The kit will have special clips that the shelf sits on. Slide these clips onto the hanging cables. Don’t tighten them all the way yet.
Step 5: Position the Shelf Carefully rest your glass or acrylic shelf on the clips. Use a level to make sure it’s perfectly straight. Adjust the clips up or down the cables until the shelf is level.
Step 6: Tighten Everything Once the shelf is level and in the right position, an adult will tighten all the screws on the clips to lock the shelf in place. Now you have a beautiful floating shelf for your plants!
18. Rustic Mason Jar Organizer
Get small items off the counter and onto the wall with a charming mason jar organizer. This is a popular DIY project that adds a touch of farmhouse style to any bathroom.
This organizer is great for holding things you use every day, like makeup brushes, cotton balls, Q-tips, and toothbrushes. Mounting the jars on a piece of wood keeps them secure and turns everyday clutter into a neat and tidy display.
DIY: Building Your Mason Jar Holder
This is a classic and fun project to build with a grown-up.
What You’ll Need:
- A piece of wood (reclaimed wood looks great)
- Sandpaper
- Mason jars
- Pipe clamps (make sure they fit around your jars)
- A screwdriver
- Screws to attach the clamps to the wood
Instructions:
Step 1: Prepare Your Wood First, sand your piece of wood to make it smooth and get rid of any splinters. You can paint or stain it if you want, or leave it natural.
Step 2: Position Your Jars Place your mason jars on the wood to decide where you want them to go. Space them out evenly. Use a pencil to make a little mark on the wood behind where each jar will be.
Step 3: Attach the Clamps Take your pipe clamps. They are little metal ribbons with a screw that tightens them. Open them up. Hold one against the wood where you made a mark. There should be a small hole in the clamp for a screw. An adult should screw the clamp to the wood board. Attach one clamp for each jar.
Step 4: Place the Jars Now, put a mason jar inside each open clamp.
Step 5: Tighten the Clamps Use a screwdriver to slowly tighten the screw on each pipe clamp. The metal ribbon will get smaller and smaller until it’s holding the mason jar very tightly. Make sure they are snug so the jars don’t wiggle.
Step 6: Hang it Up! An adult can now hang your finished organizer on the wall using strong screws. Fill your jars and enjoy your tidy counter!
19. Wall-Mounted Spice Racks
Spice racks aren’t just for the kitchen. Their shallow design makes them an excellent storage solution for small bottles in the bathroom, like nail polish, essential oils, or travel-sized toiletries.
Mounting a few of these on the wall keeps your collection visible and organized. You can quickly see every color of nail polish without having to dig through a bag or a drawer. Some racks even have a small bar on the front to ensure nothing falls off.
DIY: Building a Simple Ledge Shelf
You can build a very simple version of these racks yourself.
What You’ll Need:
- Three small, flat pieces of wood for each shelf (one for the back, one for the bottom, and one for the front)
- A thin wooden dowel
- Wood glue
- A drill and small screws
- Sandpaper
Instructions:
Step 1: Sand Your Wood Sand all your wood pieces to make them nice and smooth.
Step 2: Build the L-Shape Take your back piece and your bottom piece. Put a line of wood glue along one long edge of the bottom piece. Press it against the face of the back piece to create an “L” shape. An adult can add a few small screws from the back to make it extra strong.
Step 3: Add the Front Lip Now, take your small front piece. Put glue along its bottom edge and press it onto the front edge of the bottom shelf. This creates a little lip so your bottles don’t slide off.
Step 4: Add the Safety Bar For extra security, an adult can drill two small holes through the sides of your shelf. Then, they can slide the thin wooden dowel through, creating a safety bar. A dab of glue will hold it in place.
Step 5: Let It Dry and Hang Let all the glue dry. An adult can then hang your new shelf on the wall with screws. You can make and hang several to create a beautiful display.
20. Slim Mirrored Storage Tower
When you need a lot of storage but don’t have a lot of wall width, a tall, narrow cabinet is a great solution. It takes advantage of vertical space to store towels, toiletries, and more.
A cabinet with a mirrored door is especially smart for a small bathroom. The mirror helps to make the space feel larger and brighter by reflecting light. Inside, adjustable shelves allow you to customize the cabinet to fit both tall bottles and stacks of folded towels.
DIY: Installing a Tall Cabinet
Because this cabinet is tall and narrow, it’s very important that an adult secures it to the wall so it can never tip over.
What You’ll Need:
- The cabinet (usually comes flat-packed in a box)
- A screwdriver and any included tools
- A stud finder
- A drill
- L-brackets or a furniture anti-tip kit
Instructions:
Step 1: Assemble the Cabinet First, an adult will need to assemble the cabinet itself. This means following the instructions in the box to attach the sides, back, top, bottom, and shelves.
Step 2: Attach the Door The last step of assembly is usually attaching the mirrored door to the hinges on the cabinet frame.
Step 3: Move it Into Place Carefully move the tall cabinet into the corner or against the wall where you want it to go.
Step 4: Find a Stud An adult will use the stud finder to locate a strong wooden stud in the wall directly behind the cabinet. This is the safest place to anchor it.
Step 5: Secure the Cabinet to the Wall This is the most important safety step. The adult will use an L-bracket or a strap from an anti-tip kit. They will screw one end of the bracket into the top of the cabinet and the other end directly into the wall stud they located.
Step 6: Fill It Up Now that the cabinet is safely secured to the wall, you can adjust the shelves inside and fill it with all your bathroom supplies.
21. Cabinet Turntable Organizer
A turntable, or Lazy Susan, is a simple but brilliant tool for conquering deep bathroom cabinets. No more knocking over bottles to reach something in the back. A quick spin brings everything from the back to the front.
This organizer is wonderful for grouping items together, like cleaning supplies, medicines, or skincare products. The raised edge on the trays ensures that nothing flies off when you turn it. Using a two-tiered version doubles your storage space instantly.
DIY: Assembling Your Turntable
Most turntables come ready to use, but some two-tiered models require a minute of simple assembly.
What You’ll Need:
- All the parts from the box (two round trays, center posts, screws)
- A small screwdriver
Instructions:
Step 1: Unpack Your Pieces Lay out the two round trays and the metal or plastic posts that will connect them.
Step 2: Attach Posts to the Bottom Take the bottom tray. You will see small holes in the center. Place the posts over these holes and use the included screws to attach them. An adult can help tighten them with a screwdriver.
Step 3: Add the Top Tray Now, take the second tray and place it on top of the posts. Line up the holes in the center of the tray with the tops of the posts.
Step 4: Secure the Top Screw the top tray onto the posts from above. Make sure everything is tight and doesn’t wobble.
Step 5: Give it a Spin! Your two-story turntable is built. Place it in your cabinet, fill it up, and give it a test spin.
22. Shower Curtain Pocket Organizer
Add a huge amount of storage right inside your tub with a shower curtain organizer. This is a waterproof liner with built-in mesh pockets that hangs from your existing shower curtain rings.
This is an amazing solution for bathrooms shared by a family. Everyone can have their own row of pockets for their shampoo and soap. The mesh material allows water to drain and items to dry quickly, preventing mildew. It’s also great for keeping kids’ bath toys contained.
DIY: Installing Your Shower Organizer
This is one of the easiest storage solutions to set up.
What You’ll Need:
- A shower curtain pocket organizer
- Your existing shower curtain rings
Instructions:
Step 1: Take Down Your Current Liner First, unhook your existing shower curtain or liner from the rings. You can leave the decorative outer curtain on the rings if you like.
Step 2: Find the Holes The new pocket organizer has a row of holes (grommets) along the top edge, just like a regular shower curtain.
Step 3: Hang it Up Simply hook the new organizer onto your shower rings. Make sure the pockets are facing inside the shower.
Step 4: Add Your Old Liner (Optional) If you want to use your old liner for extra protection, you can hang it on the rings right next to the new organizer. The organizer should be the innermost curtain.
Step 5: Get Organized That’s it! The pockets are now ready to be filled with all your shower essentials.
23. Bathroom Storage Stool
A storage stool is a hardworking piece of furniture for a small bathroom. It offers a place to sit, a spot to hide things away, and can even act as a small table or step.
This is a wonderful spot to store extra toilet paper, cleaning supplies, or bath toys out of sight. The lid keeps everything dust-free and hidden, making your bathroom look much tidier. A stool made from a water-resistant material like bamboo is a great choice for the humid bathroom environment.
DIY: Assembling a Storage Stool
Most storage stools come in a flat-pack box and are easy to put together.
What You’ll Need:
- All the parts from the stool’s box (sides, lid, bottom, screws)
- The Allen key or tool that comes with it
Instructions:
Step 1: Lay Out the Parts Open the box and check the instruction sheet to make sure you have all the pieces.
Step 2: Build the Box Take two of the side panels. Line them up to form a corner. Use the included screws and Allen key to connect them.
Step 3: Complete the Sides Attach the third and fourth side panels in the same way, until you have built a complete square or rectangle box shape.
Step 4: Add the Bottom Some stools have a bottom panel that slides into grooves on the side pieces. Carefully slide this panel into place.
Step 5: Attach the Lid The lid will have hinges on one side. Line up these hinges with the pre-drilled holes on the top edge of the box. An adult can help you screw the hinges into place.
Step 6: Ready for Storage Your stool is now built. You can place it next to the tub, fill it with your items, and close the lid.
24. Tension Pole Caddy
For bathrooms with limited wall space, a tension pole caddy is a storage superstar. It uses the vertical space in the corner of your shower or next to your tub, stretching from the floor to the ceiling.
The best part is that it requires no tools or drilling. The pole is held in place by a spring inside, creating tension. The shelves or baskets are usually adjustable, so you can move them up or down to fit tall bottles and other supplies.
DIY: Setting Up Your Tension Pole
Getting the tension just right is the key to a sturdy caddy.
What You’ll Need:
- All the parts from the box (pole sections, shelves, springs)
Instructions:
Step 1: Connect the Poles Your pole will come in several sections. Slide them together to create one long pole. Don’t put the final spring-loaded piece in yet.
Step 2: Add Your Shelves Slide the baskets or shelves onto the pole. Most caddies come with small rubber or plastic rings. You slide a ring onto the pole, then slide a shelf on top of it. This lets you choose the height of your shelves.
Step 3: Measure the Height Hold the pole in the corner where it will go. You will need to add or remove one of the pole sections to get it as close to your ceiling height as possible.
Step 4: Add the Spring Now, put the final spring-loaded section into the top of the pole. This is the piece that will create the tension.
Step 5: Put it in Place Place the bottom of the pole on the floor or tub edge. Now, push the top part of the pole upwards—this squishes the spring—and slide it into place against the ceiling. When you let go, the spring will push against the ceiling and floor, holding the pole tight.
Step 6: Adjust and Fill Make sure the pole is straight and sturdy. Adjust your shelves to the final height you want, and you’re ready to organize.
25. Wall-Mounted Wicker Cubes
Bring natural texture and modern organization to your walls with a set of wicker storage cubes. These open boxes provide a stylish home for rolled towels, toilet paper, or decorative items.
The modular nature of these cubes means you can create a custom layout. Stack them vertically in a narrow space, or arrange them in a creative pattern on a larger wall. They are lightweight yet sturdy, turning everyday bathroom supplies into a beautiful wall display.
DIY: Hanging Wicker Cubes
Securely mounting these cubes is important to make sure they can hold your items safely.
What You’ll Need:
- Wicker or seagrass cubes
- A pencil
- A level
- A drill
- Wall anchors and screws
Instructions:
Step 1: Plan Your Layout Decide where you want your cubes to go on the wall. You can even use painter’s tape to outline the shapes on the wall to see how it will look.
Step 2: Mark Your First Cube Hold the first cube against the wall. Use your level to make sure it’s straight. Use a pencil to make a mark on the wall through the hanging holes or loops on the back of the cube.
Step 3: Drill and Add Anchors Set the cube aside. An adult should drill holes where you made your pencil marks. Then, they should gently tap a plastic wall anchor into each hole until it’s flush with the wall.
Step 4: Screw It In The adult should then drill a screw into each anchor, but don’t drill it all the way in. Leave the screw sticking out just a little bit, about a quarter of an inch.
Step 5: Hang the Cube Now, hang the cube by lining up the holes on the back with the screws you just put in the wall. The cube should slide down slightly and hang securely.
Step 6: Repeat for Other Cubes Repeat these steps for all the other cubes, using your level to make sure they all line up nicely.
26. Picture Ledge Shelves
Picture ledges are a minimalist’s dream for bathroom storage. These super-slim shelves have a small lip on the front, which makes them great for displaying items without fear of them slipping off.
Because they are not very deep, they can fit in tight spaces, like above the toilet or on a narrow wall. They are a stylish way to show off your favorite perfumes, skincare bottles, or small pieces of art. Installing a pair of them creates a clean, layered look.
DIY: Installing Picture Ledges
This is a quick installation project that an adult can do in minutes.
What You’ll Need:
- Picture ledge shelves
- A level
- A pencil
- A drill
- Wall anchors and screws
Instructions:
Step 1: Choose Your Height Hold the first ledge against the wall to decide how high you want it.
Step 2: Level and Mark Place the level on top of the shelf to make sure it’s perfectly straight. Once it’s level, use a pencil to mark the wall through the screw holes on the back of the ledge.
Step 3: Drill Your Holes Set the shelf down. An adult should drill holes on your pencil marks. If the holes are not on a wall stud, they should tap in wall anchors.
Step 4: Attach the Ledge Hold the ledge up to the wall again, lining up the holes. An adult should use the drill to drive the screws through the ledge and into the wall anchors.
Step 5: Check for Sturdiness Give the shelf a gentle tug to make sure it’s securely attached to the wall.
Step 6: Add the Second Ledge Repeat the process for the second ledge, using your measuring tape to make sure it is spaced evenly below the first one.
27. Pull-Out Vanity Organizer
Transform a narrow, useless space in your vanity into a storage powerhouse with a pull-out organizer. This is a special type of cabinet that slides out on wheels or tracks, giving you easy access to multiple levels of storage.
This is the ultimate solution for those tiny 6-inch gaps that are often left next to a standard cabinet. The tall, skinny shelves are great for holding bottles of mouthwash, lotion, and cleaning supplies. You can see and reach everything at once without digging.
DIY: Installing a Pull-Out Cabinet
Installing one of these requires precision, so it’s a great project to watch and learn from an adult.
What You’ll Need:
- A pull-out cabinet kit (includes the cabinet box and sliding hardware)
- A drill
- A measuring tape
- A pencil
Instructions:
Step 1: Assemble the Cabinet First, an adult will follow the instructions to assemble the main box or shelf unit of the organizer.
Step 2: Install the Slides The kit comes with two sliding tracks. One gets attached to the floor of the vanity opening, and the other gets attached to the bottom of the pull-out cabinet. The adult will measure carefully to make sure they are parallel.
Step 3: Attach the Bottom Track The adult will secure the bottom track to the floor of the vanity using a drill and screws.
Step 4: Connect the Cabinet Now, they will carefully slide the cabinet (with its track already attached) into the vanity opening, connecting it with the track on the floor. It should click into place.
Step 5: Attach the Door The final step is to attach the cabinet door front to the pull-out unit. This is the trickiest part, as it needs to be perfectly aligned with the other cabinet doors.
Step 6: Test it Out Give the new cabinet a few pulls to make sure it slides in and out smoothly.
28. Labeled Apothecary Jars
Turn your bathroom counter or shelves into an elegant and organized display with a set of glass apothecary jars. These classic containers are perfect for storing everyday items in a beautiful way.
Using clear jars lets you see instantly when you are running low on things like cotton balls, bath salts, or small soaps. Adding stylish, uniform labels to each jar takes the organization to the next level. It creates a clean, cohesive look that feels like a boutique hotel.
DIY: Making Your Own Labeled Jars
This is a super easy and fun project that you can do yourself.
What You’ll Need:
- Glass jars with lids (they don’t have to match!)
- Printable sticker paper or pre-cut labels
- A computer and printer
- Your bathroom supplies (cotton balls, Q-tips, etc.)
Instructions:
Step 1: Clean Your Jars First, wash and thoroughly dry all your glass jars and their lids. You want them to be sparkling clean.
Step 2: Design Your Labels On a computer, use a simple program like Word or Canva to design your labels. Choose a nice font and type out the names of the items: “SALTS,” “COTTON,” “SOAPS,” etc.
Step 3: Print Your Labels Print your designs onto the printable sticker paper. Make sure you follow the instructions for your printer.
Step 4: Cut and Stick Carefully cut out each label. Peel the backing off and stick the label right in the center of your jar. Smooth it out with your fingers to get rid of any air bubbles.
Step 5: Fill Them Up Now for the fun part! Fill each jar with the correct item. Put cotton balls in the “COTTON” jar, Q-tips in the “Q-TIPS” jar, and so on.
Step 6: Arrange Your Display Place your beautiful new jars on a shelf or on a nice tray on the back of your toilet. Your bathroom will look so organized!
29. Under-Shelf Towel Rack
Make use of every inch of space in your linen closet or on an open shelf with an under-shelf towel rack. This clever accessory slides onto an existing shelf and hangs below, creating a new spot for storage.
This type of rack is specially designed to hold hand towels or washcloths that have been rolled up. It keeps them neat, tidy, and easy to grab one at a time. It’s a great way to add more storage capacity without having to install a whole new shelf unit.
DIY: Installing an Under-Shelf Rack
This is one of the simplest DIYs ever—it takes less than a minute!
What You’ll Need:
- An under-shelf towel rack
Instructions:
Step 1: Empty the Shelf Take everything off the shelf where you want to hang the rack.
Step 2: Find the Prongs Look at your new rack. It will have two flat arms or “prongs” on the top.
Step 3: Slide It On Hold the rack underneath the shelf. Simply slide it forward so the prongs slide onto the top of the shelf.
Step 4: Push It Back Push the rack all the way back until the front of it is flush with the edge of the shelf.
Step 5: Put Your Stuff Back You can now put your other items back on the shelf, right on top of the prongs. The weight of those items will help hold the hanging rack in place.
Step 6: Roll and Load Roll up your hand towels or washcloths and slide them into their new home.
30. Open-Shelf Vanity with Baskets
An open-shelf vanity creates a light and airy feeling in a bathroom. Instead of bulky doors, it features an open shelf at the bottom, which is great for storage that also looks good.
The key to keeping an open vanity from looking messy is to use containers. Large wicker or fabric baskets are great for hiding bigger, less attractive items. A nice tray can be used to group together smaller items like candles or jars. This approach, called “corraling,” turns potential clutter into a thoughtful display.
DIY: Organizing Your Open-Shelf Vanity
The “do it yourself” part here is all about the organizing strategy.
What You’ll Need:
- Baskets that fit on your shelf
- Decorative trays
- Smaller containers or jars
Instructions:
Step 1: Empty and Clean Start by taking everything off the bottom shelf of your vanity. Give the shelf a good wipe down.
Step 2: Sort Your Stuff Look at all the items you want to store. Group them into categories. For example, put all your extra toilet paper in one pile, all your cleaning supplies in another, and all your extra towels in a third.
Step 3: Use a Big Basket for Hiding Take the items you don’t necessarily want to see every day (like cleaning sprays or a bulk pack of soap). Place them neatly inside one or two large baskets. Slide these baskets onto the shelf.
Step 4: Use a Basket for Towels Neatly roll or fold your extra hand towels and bath towels. Place them in another basket. This looks much tidier than just a pile of towels.
Step 5: Use Trays for Pretty Things Take your prettier items, like candles, a nice bottle of lotion, or a small plant. Group them together on a decorative tray. This makes them look like an intentional decoration.
Step 6: Step Back and Admire Arrange your baskets and trays on the shelf. You’ve now organized the space so it’s both functional and beautiful to look at.
31. First-Aid Door Organizer
An over-the-door shoe organizer can be repurposed into a highly effective first-aid station. The clear pockets let you see everything instantly, so you can find a bandage or antiseptic wipe in a hurry.
This system allows you to sort supplies by category. Dedicate specific pockets for bandages, ointments, allergy medicines, and pain relievers. Adding clear labels and an emergency contact sheet at the top makes your kit easy for anyone to use safely.
DIY: Creating a First-Aid Station
This is a simple organization project that can be a real lifesaver.
What You’ll Need:
- A clear, over-the-door pocket organizer
- First-aid supplies
- A label maker or printable sticker paper
- A card for emergency numbers
Instructions:
Step 1: Gather Your Supplies Collect all your first-aid items from wherever they are hiding. Check expiration dates and throw away anything that is old.
Step 2: Sort into Piles Create piles for different categories: one for cuts and scrapes (bandages, antiseptic wipes), one for ointments and creams, one for medicines, etc.
Step 3: Label Your Pockets Use your label maker or printed stickers to create a clear label for each category. Stick a label on the outside of the pockets you will use for each group.
Step 4: Fill the Organizer Place your sorted items into the correctly labeled pockets. Don’t overstuff them; you want to be able to grab things easily.
Step 5: Add an Emergency Card In the top pocket, place a clearly written card with emergency phone numbers, such as poison control and your family doctor.
Step 6: Hang it Up Hang the completed organizer on the back of the bathroom or linen closet door. Everyone in the family will know exactly where to find help when they need it.
32. Rotating Corner Storage Tower
Maximize the storage potential of an awkward corner with a rotating storage tower. This clever cabinet spins 360 degrees, giving you access to multiple sides of storage in one compact footprint.
One side might feature a full-length mirror, while the other sides offer open shelving for towels and toiletries, and hooks for robes. It’s a complete storage center that tucks away neatly. The spinning function means nothing ever gets lost at the back.
DIY: Assembling a Rotating Cabinet
Building one of these is like a puzzle, but the instructions will guide you.
What You’ll Need:
- All the parts from the cabinet’s box
- A screwdriver and any included tools
Instructions:
Step 1: Build the Core Frame Following the instructions, you will likely start by building the main box or frame of the cabinet. This involves screwing the side panels to the top and bottom.
Step 2: Install the Shelves Once the frame is built, you will insert the shelves. They might slide into grooves or be held in place with small pegs.
Step 3: Attach the Special Features Now, an adult will help you attach the other parts, like the mirror to one side and the hooks to another, using the provided screws.
Step 4: Assemble the Rotating Base The kit will come with a special rotating base, which looks like two flat circles with ball bearings in between. An adult will screw one part of the base to the bottom of the cabinet.
Step 5: Secure it in Place The other part of the base gets screwed to the floor where the cabinet will stand. Then, the cabinet is carefully placed on top, and the two parts of the base are connected.
Step 6: Give it a Whirl Once it’s all connected, your cabinet should spin smoothly. Now you can fill all the sides with your bathroom items.
33. Stacked Crate Shelving
For a touch of rustic, industrial style, create your own modular shelving unit using wooden crates. This approach is highly customizable, allowing you to design a storage shape that perfectly fits your space and your needs.
You can arrange the crates in a straight tower or an interesting geometric pattern. Use them to store towels, toilet paper, or decorative baskets. Leaving some crates empty or adding a plant or photo frame adds personality to the functional display.
DIY: Building with Wooden Crates
This is a fun project where you get to be the designer!
What You’ll Need:
- Several wooden crates (you can find these at a craft store)
- Sandpaper
- Wood stain or paint (optional)
- A drill
- Screws and L-brackets
Instructions:
Step 1: Smooth the Crates Wooden crates can sometimes have rough spots or splinters. Use sandpaper to smooth all the edges.
Step 2: Stain or Paint (Optional) If you want to change the color of your crates, now is the time to paint them or apply a wood stain with an adult’s help. Let them dry completely.
Step 3: Design Your Layout Arrange the crates on the floor to figure out the shape you want to create on your wall. Take a picture with a phone so you don’t forget your design.
Step 4: Connect the Crates to Each Other For extra stability, an adult should connect the crates to each other where they touch. They can do this by drilling a small screw from the inside of one crate into the side of the crate next to it.
Step 5: Secure the Unit to the Wall This is a very important step. Your crate structure needs to be safely attached to the wall. An adult should use L-brackets. They will screw one side of the L-bracket to the top of a few of the crates, and the other side into the wall (using wall anchors if needed).
Step 6: Style Your Shelves Now that your new shelf unit is safe and secure, you can fill it with towels, baskets, and decorations.
34. Countertop Charging Station
Keep the clutter of electric toothbrushes, shavers, and their messy cords out of sight with a countertop charging station. This simple wooden box hides a power strip inside, providing a single, tidy spot to charge all your devices.
The flip-top lid gives you easy access while keeping the tangle of wires completely hidden. Small hooks and cutouts for cords help to keep everything organized within the box. It’s a small change that makes your countertop look instantly cleaner.
DIY: Build a Simple Charging Box
An adult with some woodworking skills can build a simple version of this.
What You’ll Need:
- A few pieces of wood to make a box
- A saw (for adult use)
- Wood glue and small nails
- Two small hinges and a handle
- A drill
Instructions:
Step 1: Cut Your Wood An adult will cut the wood pieces: four for the sides and one for the bottom.
Step 2: Build the Box Frame Using wood glue and small nails, the adult will assemble the five pieces into an open-topped box.
Step 3: Create a Cord Opening The adult should use a drill with a large bit to make a hole in the back of the box. This is where the cord for the power strip will go through.
Step 4: Make the Lid Another piece of wood will be used for the lid. An adult will attach it to the top of the box using the two small hinges. They can also add a small handle to the front to make it easy to open.
Step 5: Finishing Touches You can sand the box to make it smooth, and then paint or stain it to match your bathroom.
Step 6: Set It Up Place a small power strip inside the box, feeding its cord out through the hole in the back. Now you can plug in your toothbrush and shaver chargers inside the box and close the lid to hide the mess.
35. Freestanding Towel Warmer
Enjoy the comfort of a warm towel without any complex installation. A freestanding towel warmer is a portable, plug-in device that can be placed anywhere near an outlet.
This type of warmer often has a sleek, modern design, looking more like a floor lamp than a bathroom fixture. You can use it to warm towels in a nearby basket or hang a towel over it just before you hop in the shower. It’s a simple touch of luxury for any bathroom.
DIY: Assembling Your Freestanding Warmer
These warmers are very easy to put together.
What You’ll Need:
- All the parts from the warmer’s box (usually a base and a post)
- The screw and tool provided
Instructions:
Step 1: Unpack the Parts Lay out the heavy base and the tall heating post.
Step 2: Find the Connection Point Look at the bottom of the post. You will see a spot where a screw goes in. Line this up with the hole in the center of the base.
Step 3: Attach the Post An adult should insert the provided screw from underneath the base up into the post. They will use the included tool to tighten it until the post is standing up straight and is not wobbly.
Step 4: Plug it In and Warm Up! That’s it! Place the warmer in a safe spot away from water, plug it in, and press the button. It will start to heat up, ready for your towels.
36. Hidden Pull-Out Step Stool
A pull-out step stool is a brilliant solution for making the sink accessible to children without having a bulky plastic stool cluttering up the floor. It’s built right into the vanity and slides out when needed.
This custom feature is hidden behind a panel that looks just like another cabinet door or the toe-kick area. When you’re done, it slides away completely, keeping the look of your bathroom clean and seamless. It’s a fantastic blend of safety, convenience, and smart design.
DIY: Understanding How a Hidden Stool is Built
This is a project for an experienced cabinet maker, but it’s cool to know how it works.
What You’ll Need (for a professional):
- Wood to build the step stool box
- Heavy-duty drawer slides
- A cabinet front panel
- A hinge system
The Steps (Simplified!):
Step 1: Build the Step First, a woodworker builds a strong, low box out of thick plywood. This is the step stool itself.
Step 2: Attach the Slides They then attach heavy-duty drawer slides (like the ones on a kitchen drawer) to the sides of the step stool box. The other half of the slides get attached to the inside of the vanity opening.
Step 3: Create the Folding Front The panel that hides the stool needs to be able to flip down. The woodworker attaches this panel to the front of the step stool box with special hinges that allow it to fold.
Step 4: Put It All Together The completed stool is then slid into the vanity opening, connecting the drawer slides.
Step 5: How It Works When you pull on the handle, the whole unit slides out like a drawer. The front panel then folds down and rests on the floor, creating a sturdy step. When you’re done, you flip the front up and slide the whole thing back in.
37. Hanging Rope Shelves
Add a touch of nautical or bohemian charm to your bathroom with a set of hanging rope shelves. This is a stylish and eye-catching way to add storage for plants, candles, or toiletries.
The shelves are suspended by thick ropes that are securely mounted to the ceiling, giving them a floating appearance. The natural texture of the rope combined with the wood of the shelves creates a warm and inviting look. This is a great project for a wall where a standard cabinet might feel too heavy.
DIY: Making Your Own Rope Shelves
This project is all about careful measuring and tying strong knots.
What You’ll Need:
- Two wooden shelves of the same size
- Sandpaper and wood stain (optional)
- A drill
- Thick rope (four times the length from your ceiling to the bottom shelf, plus extra for knots)
- Four heavy-duty ceiling hooks
Instructions:
Step 1: Prepare Your Shelves Sand your wooden boards to make them smooth. You can stain or paint them if you like.
Step 2: Drill the Holes An adult needs to drill a hole in each of the four corners of both shelves. The hole should be just big enough for the rope to squeeze through. Make sure the holes are in the exact same spot on both boards.
Step 3: Install the Ceiling Hooks An adult must install the four hooks into the ceiling. It is very important that these hooks go into the strong wooden beams (joists) in the ceiling so they can hold the weight.
Step 4: Thread the Ropes Cut your rope into four equal pieces. Take one piece and thread it down through a ceiling hook. Then, thread both ends of that rope down through the matching corner holes on your top shelf.
Step 5: Tie Your First Knots Decide how high you want your top shelf to be. Tie a big, strong knot in the rope under each of the four corners of that shelf. Use a level to make sure the shelf is straight before you tighten the knots.
Step 6: Add the Second Shelf Now, thread the ropes down through the corner holes of the bottom shelf. Decide on the spacing you want, and then tie another set of big, strong knots under each corner of the bottom shelf. Make sure it’s level, too. You can trim any extra rope at the bottom.
38. Sliding Barn Door Medicine Cabinet
Combine rustic farmhouse style with practical storage by choosing a medicine cabinet with a sliding barn door. This design offers both open and concealed storage in one unit.
The open shelves are great for displaying decorative items or keeping everyday essentials within easy reach. You can slide the barn door to one side to access the hidden shelves, where you can store things you’d prefer to keep out of sight. The hardware itself becomes a stylish feature above your sink.
DIY: Building a Barn Door Cabinet
This is a fun project for an adult who is comfortable with woodworking.
What You’ll Need:
- Wood to build the cabinet box and door
- A small barn door hardware kit (includes a track and rollers)
- A drill and screws
- Wood glue
Instructions:
Step 1: Build the Cabinet Box An adult will build a simple, open-backed rectangular box with a center divider. They will also install one or two shelves on one side of the divider.
Step 2: Build the Door Next, they will build the door. For the classic “X” barn door look, they will create a simple panel and then glue and nail two diagonal pieces of wood on top.
Step 3: Install the Track The hardware kit comes with a metal track. The adult will mount this track just above the opening of the cabinet box.
Step 4: Attach the Rollers The kit also has two little wheels on brackets (the rollers). These get screwed onto the top of the door.
Step 5: Hang the Door Now for the fun part! The adult will hang the door by hooking the rollers over the track. The door should now slide back and forth smoothly.
Step 6: Mount the Cabinet The final step is for an adult to securely mount the entire cabinet on the wall using strong screws drilled into the wall studs.
39. Coordinated Countertop Set
One of the simplest ways to make a bathroom counter look less cluttered is to use a matching accessory set. A coordinated soap dispenser, toothbrush holder, and cup, all placed on a single tray, can instantly tidy up the sink area.
This strategy, known as “corraling,” groups all the small sink-side items into one visual unit. It stops things from spreading out and looking messy. Choosing a set made from a nice material, like resin, ceramic, or stone, adds a touch of sophisticated style.
DIY: Create Your Own Coordinated Set
You don’t have to buy a new set. You can create a matching look with what you already have.
What You’ll Need:
- Your existing soap dispenser, toothbrush holder, etc.
- A can of spray paint that is made for plastic or ceramic
- A decorative tray
- Newspaper or a drop cloth
Instructions:
Step 1: Clean Your Items First, make sure all the items you want to paint are completely empty, clean, and dry.
Step 2: Set Up Your Paint Area In a well-ventilated area (like outside), lay down newspaper to protect the ground. This is a job for a grown-up.
Step 3: Paint Everything! The adult should apply a thin, even coat of spray paint to all the pieces. It’s better to do two or three light coats than one thick, drippy coat. Let the paint dry completely between coats.
Step 4: Let it Cure Even after the paint feels dry, it needs to “cure” to become hard and durable. Let the pieces sit for at least 24 hours before you use them.
Step 5: Assemble Your New Set Once everything is fully cured, you can refill your soap dispenser.
Step 6: Put It on a Tray Place your newly matching items together on a nice tray next to your sink. It looks like a brand new, expensive set!
40. Over-the-Toilet Étagère
An étagère is a freestanding shelf unit designed to fit perfectly over a standard toilet. It’s one of the easiest ways to add a large amount of storage to a bathroom without drilling any holes in the walls.
These units make use of the abundant but often-wasted vertical space above the toilet. They offer a combination of open shelves for towels and baskets, and sometimes a small cabinet for hiding away less attractive items. It’s a classic and highly functional bathroom storage solution.
DIY: Assembling an Étagère
Like most freestanding furniture, these units come in a box and require some assembly.
What You’ll Need:
- All the parts from the box (legs, shelves, cabinet parts, screws)
- A screwdriver and any included tools
Instructions:
Step 1: Check All Your Pieces Lay out all the parts and compare them to the instruction manual to make sure everything is there.
Step 2: Build the Sides You will likely start by connecting the upper and lower parts of the two side frames or legs.
Step 3: Attach the First Shelf An adult will help you attach the lowest shelf between the two side frames. This is the shelf that will go just above the toilet tank. This will make the unit start to feel sturdy.
Step 4: Add the Upper Shelves Working your way up, attach the rest of the open shelves using the included screws.
Step 5: Build and Attach the Cabinet If your unit has a small cabinet, you will assemble that little box separately and then mount it onto the frame in its designated spot.
Step 6: Move it into Place This is a two-person job. Carefully lift the completed unit and slide it into place behind your toilet. For safety, most kits come with a small strap to anchor the top of the unit to the wall to prevent it from tipping.
41. Wall-Mounted Pegboard Organizer
A pegboard transforms an empty wall into a completely customizable storage center. This system is incredibly versatile, allowing you to arrange shelves, hooks, and baskets in any way that suits your needs.
It’s a fantastic way to get a large number of items off your counter while keeping them visible and organized. You can create specific zones for makeup, skincare, and towels. As your collection changes, you can simply move the accessories around to create a new layout.
DIY: Setting Up Your Pegboard
Mounting a pegboard securely is the key to a great wall organizer.
What You’ll Need:
- A pegboard sheet
- Wooden boards for a frame (optional, but recommended)
- A drill, screws, and wall anchors
- A level and pencil
- A variety of pegboard hooks, shelves, and baskets
Instructions:
Step 1: Find a Good Spot Choose a clear section of wall. An adult will use a stud finder to locate the strong wooden studs in the wall for the most secure installation.
Step 2: Build a Frame (Optional) For the pegs and hooks to fit, the pegboard needs a small gap behind it. An adult can build a simple wooden frame that is the same size as the pegboard. This frame will be mounted to the wall first.
Step 3: Mount the Pegboard The adult will hold the pegboard (with its frame) against the wall, use a level to make sure it’s straight, and mark the screw holes. Then, they will drill the board securely to the wall, making sure to hit the studs.
Step 4: Get Creative with Accessories This is the fun part! Take your collection of hooks, shelves, and baskets and start placing them in the holes. There’s no right or wrong way to do it.
Step 5: Arrange Your Items Hang up your cups of makeup brushes, place your lotions on the shelves, and put your folded towels in the baskets. Step back and admire your creation.
Step 6: Rearrange Anytime The best part about a pegboard is that you can change it whenever you want. Just pull out the hooks and try a new arrangement!
42. Smart Mirror with Side Storage
Upgrade your bathroom with a high-tech smart mirror that does more than just show your reflection. These units combine a medicine cabinet with open side-shelving and modern electronic features.
The main mirror often includes adjustable lighting, a digital clock, and even a defogger for after a steamy shower. The open shelves on the side offer a place for items you want to access quickly or display. This combination of hidden and open storage helps keep your counter clear.
DIY: Installing Your Smart Mirror
This is an advanced project that requires an adult and a professional electrician.
What You’ll Need:
- The smart mirror cabinet
- A drill, level, and stud finder
- A qualified electrician
Instructions:
Step 1: Choose the Location The mirror should be centered over your sink. An adult will hold it up to the wall to mark its position.
Step 2: Find the Studs and Mark Holes Using a stud finder, the adult will locate the strong beams in the wall. They will hold the cabinet in place, make sure it’s level, and mark the locations for the mounting screws.
Step 3: Mount the Main Unit An adult will drill pilot holes and then securely screw the main body of the cabinet to the wall. This is a heavy item, so it’s important it is attached to the studs.
Step 4: Call the Electrician! This is the most important step. For the lights, clock, and other features to work, the mirror must be wired into your home’s electricity. This job is ONLY for a professional electrician. It is very dangerous to do this yourself.
Step 5: Final Assembly Once the electrician has safely connected all the wires, the adult can attach the mirrored door and any side shelving that came with the unit.
Step 6: Power On With everything assembled and safely wired, you can now turn on your new smart mirror and enjoy all its features.
We’ve explored 42 different ways to bring order to your bathroom. From the floor to the ceiling, and in every corner and cabinet, there is a storage opportunity waiting. Transforming a cluttered space into a serene and functional room is well within your reach.
The goal isn’t just to hide your things away. It’s about creating simple systems that make your daily routine easier. When everything has a place, you spend less time searching and more time enjoying your calm, organized retreat.
Don’t feel like you have to tackle everything at once. Choose one project that inspires you—hang a shelf, assemble a cart, or organize a single drawer. You will be amazed at the difference one small change can make.
Key Takeaways
- Think Vertically: The best way to increase storage in a small room is to use your walls. Floating shelves, over-the-toilet units, and tall, slim cabinets make use of space you already have.
- Use Every Hidden Space: The back of a door, the inside of a cabinet, and the area under your sink are storage goldmines. Use organizers designed for these spots to maximize their potential.
- Divide and Conquer: Don’t let your drawers and cabinets become black holes. Use dividers, turntables, and sliding shelves to keep everything visible and easy to reach.
- Choose Multipurpose Items: Look for furniture that does more than one job. A storage stool provides seating and a hiding spot, while a decorative ladder holds towels and adds style.
- Start Small to Win Big: The journey to an organized bathroom begins with a single step. Pick one idea from this list and complete it this weekend. That small victory will motivate you to continue.